ACCESSORIES
MED Connector Cover [MED-CC05]
- Covers the entire MED Connector (MED-C05 with MED-CPB02) and helps to maintain the bath temperature in the MED Probe.
- Built-in gas port.
- Easy drug delivery port on top of the lid.
- SPECIFICATIONS
-
General Information Size W132 x D92 x H120 mm Weight 389 g (main body: 339 g) Material Acrylic resin Accessories Gas port, Lid, Conical flask
MED Connector Cover [MED-CC06]
- Covers the entire MED Heated Connector (MED-CP04) and helps to maintain the bath temperature in the MED Probe.
- Built-in gas port.
- Easy drug delivery port on top of the lid.
- SPECIFICATIONS
-
General Information Size W215 x D120 x H95 mm Weight 491 g (main body: 443 g) Material Acrylic resin Accessories Gas port, Lid, Conical flask
MED Connector Cover [MED-CC07]
- Covers the entire MED Connector (MED-C11 with MED-CPB02) and helps to maintain the bath temperature in the MED Probe.
- Built-in gas port.
- Easy drug delivery port on top of the lid.
- SPECIFICATIONS
-
General Information Size W220 x D120 x H108 mm Weight 602 g (main body: 577 g) Material Acrylic resin Accessories Gas port, Lid, Conical flask
MED Perfusion Cap [MED-KCAP01]
- Neatly fits into the top of a MED Probe.
- Features adjustable solution inflow and outflow pipes, a platinum reference electrode, and a port for delivery of gas.
- Easily removed and replaced for slice mounting.
- Suitable for MED Probe with 10 mm chamber height.
- Pre-configured perfusion tubing available for immediate use.
- SPECIFICATIONS
-
Material Main body ABS, Stainless steel screws Inlet pipe Stainless steel Outlet pipe Stainless steel Reference electrode Platinum
MED Perfusion Cap Kit [MED-KCAP01TU]
- MED Perfusion Cap with perfusion tubing optimized for peristaltic pump (MINIPULS model 312 MP2, Gilson).
- SPECIFICATIONS
-
Material Main body ABS, Stainless steel screws Inlet pipe Stainless steel Outlet pipe Stainless steel Reference electrode Platinum
MED Pipe Holder [MED-KPK02]
- Installed onto the MED (Heated) Connector.
- Features adjustable solution inflow and outflow pipes, and a platinum reference electrode.
- Suitable for MED Probe with 5 mm chamber height.
- Pre-configured perfusion tubing available for immediate use.
- SPECIFICATIONS
-
Material Pipe holder ABS, Stainless steel screws Inlet pipe Stainless steel Outlet pipe Stainless steel Reference electrode Platinum
MED Perfusion Pipe Holder Kit [MED-KPK02TU]
- MED Pipe Holder with perfusion tubing optimized for peristaltic pump (MINIPULS model 312 MP2, Gilson).
- SPECIFICATIONS
-
Material Pipe holder ABS, Stainless steel screws Inlet pipe Stainless steel Outlet pipe Stainless steel Reference electrode Platinum
Slice Recovery Chamber [MED-RC01]
- For recovering acute brain slices made under ice-cold temperature. Combine with 200 ml flask filled with aCSF for use.
- Equips a guide port to connect tubing for oxygen babbling.
- Specifications
-
General information Size W50 x D60 x H47 mm Weight 17 g Material acrylic resin
MED Slice Anchor [MED-SLA008]
- Designed for mouse hippocampal LTP assay using MED64 System.
- Presses down on slice covered with a piece of mesh with moderate pressure.
- Its unique shape makes it easy to grasp with tweezers and does not obstruct solution flow within chamber.
- A 3.5 × 3.5 cm nylon mesh is included.
- Specifications
-
General information Size W8 x D5 x H4 mm Weight 0.39 g Material tungsten
Shield Plate [MED-KSYSB1]
- Blocks magnetic field induced noise caused by incubator.
- Put under the MED Connector for use.
- SPECIFICATIONS
-
General Information Size W200 x H10 x D170 mm Weight 906 g Material Aluminum
68-Pin SCSI Cable [MED-CB1]
- A 2 m cable connecting MED64 Head Amplifier and MED Connector.
- Wrapped by electrical conductive tape for shielding.
LED Unit Holder [MED-UH01]
- Enables to fix LED unit of MED-S11 or S12 at the proper height and position relative to MED-C03 or CP04.
- For light irradiation from top.
- SPECIFICATIONS
-
General Information Size W170 x D150 x H30 mm Weight 192 g Material Acrylic resin
LED Unit Holder [MED-UH02]
- Enables to fix LED unit of MED-S11 or S12 at the proper height and position relative to MED-C03 or CP04.
- For light irradiation from bottom.
- Specifications
-
General Information Size W170 x D150 x H30 mm Weight 138 g Material Aluminum